Lexco Cable Mfg.
7320 West Agatite
Norridge, IL 60706
PH 800.626.6556
PH 773.588.8890
FX 773.478.4584
sales@lexcocable.com
All Categories > Push-Pull Controls > Cablecraft Push-Pull Controls > Locking Brake Levers > Item # 165-508-023  


Item # 165-508-023, Flange Mount-Rigid
Request Quote QUOTE




2.5 inches (64 mm) wide side plates; two cables. For bulkhead, floor or island (doghouse) installation. Note: When considering load requirements, the load on the lever assembly will be the sum of the load in each cable. Wing flange mounting.

Kit B835 - supplied with the following hardware:
  • Clevis Pins (2)
  • Cotter Pins (2)
  • Washers (2)
  • Mounting Spacers (2)
  • Cable Clamps






Specifications

Innermember Fitting @ 3000 lb
157-047-002

Innermember Fitting @ 1500 lb
157-047-000

Conduit Fitting @ 3000 lb
072

Conduit Fitting @ 1500 lb
062

Dim A1
2.38 "

Dimension Bmin.2
3.02 "

Dimension Bmax.3
4.62 "
1 Dimension A is with the lever in full “OFF” position. Use dimension A in calculating cable length.
2 Dimension B minimum is with the lever in full “ON” position and adjusted for minimum (CCW) travel. Use dimension B minimum during installation and initial adjustment. Turn knob (CW) to add travel and increase brake pressure setting.
3 Dimension B maximum is with the lever in full “ON” position and adjusted for maximum (CW) travel.