Minimum breaking strength in tons of 2000 lbs. Actual strand construction varies by size. For example, 1/2-1"" is 1x19.
Warning: Wire rope & aircraft cable should never be used at breaking strength. 10:1 safety factor minimum is recommended for critical/overhead application. Do not use for overhead lifting without consulting a wire rope rigging professional. End fittings may not hold to 100% of strength efficiency so a safety factor such as 5:1 should be divided into the assembly actual strength. A pull test is recommended for quality assurance.
Specifications
Dia (in)
11/16
Grade 1 Class A coating Throughout
29.0
Grade 1 Class A Coating Inner Wires/ Class B Coating Outer Wires
28.1
Grade 1 Class A Coating Inner Wires/ Class C Coating Outer Wires
