Quick Attach™ Receiver
Swageless Fittings
316 Stainless Steel Note: Mechanical swage fitting allows very fast and simple attachment using a bolt or stud through a platel WLL is determined by WLL of wire used. For use with bolts or similar fasteners. “Quick Attach ™” fittings are designed for architectural and marine applications. “Quick Attach ™” fittings are not intended for lifting or other critical application. Typical breaking strength of “Quick Attach™” fittings are 90% of nominal cable strength when properly installed. Please use adequate safety factor (e.g. 5:1) when designing your assembly. WLL is determined by WLL of wire used.
These quick attached receivers are designed to be installed on to wire rope or aircraft cable.
These quick attached receivers are designed to be installed on to wire rope or aircraft cable.
Items |
![]() S0770-0703 Quick Attach™ Receiver |
![]() S0770-0704 Quick Attach™ Receiver |
![]() S0770-0905 Quick Attach™ Receiver |
![]() S0770-1007 Quick Attach™ Receiver |
||||
A Wire size | N/A 1/8" | N/A 5/32" | N/A 3/16" | N/A 1/4" | ||||
B Thread | N/A 1/4-28 | N/A 1/4-28 | N/A 5/16-24 | N/A 3/8-24 | ||||
C | N/A 0.54" | N/A 0.63" | N/A 0.75" | N/A 0.84" | ||||
D | N/A 1.46" | N/A 1.68" | N/A 2.02" | N/A 2.50" | ||||
Weight (lbs) | N/A 0.07 | N/A 0.12 | N/A 0.18 | N/A 0.28 | ||||
|